Dynamics of laser-induced cavitation bubble during expansion over sharp-edge geometry submerged in liquid – an inside view by diffuse illumination

Laser ablation in liquids is growing in popularity for various applications including nanoparticle production, breakdown spectroscopy, and surface functionalization. When laser pulse ablates the solid target submerged in liquid, a cavitation bubble develops. In case of “finite” geometries of ablated solids, liquid dynamical phenomena can occur inside the bubble when the bubble overflows the surface edge. To observe this dynamics, we use diffuse illumination of a flashlamp in combination with a high-speed videography by exposure times down to 250 ns. The developed theoretical modelling and its comparison with the experimental observations clearly prove that this approach widens the observable area inside the bubble. We thereby use it to study the dynamics of laser-induced cavitation bubble during its expansion over a sharp-edge (“cliff-like” 90°) geometry submerged in water, ethanol, and polyethylene glycol 300. The samples are 17 mm wide stainless steel plates with thickness in the range of 0.025–2 mm. Bubbles are induced on the samples by 1064-nm laser pulses with pulse durations of 7–60 ns and pulse energies of 10–55 mJ. We observe formation of a fixed-type secondary cavity behind the edge where low-pressure area develops due to bubble-driven flow of the liquid. This occurs when the velocity of liquid overflow exceeds ~20 m s⁻¹. A re-entrant liquid injection with up to ~40 m s⁻¹ velocity may occur inside the bubble when the bubble overflows the edge of the sample. Formation and characteristics of the jet evidently depend on the relation between the breakdown-edge offset and the bubble energy, as well as the properties of the surrounding liquid. Higher viscosity of the liquid prevents the generation of the jet.     

An experimental method for eliminating effect of rigid out-of-plane motion on 2D-DIC

The out-of-plane motion is one of the most important factors that affect the precision of two-dimensional digital image correlation (2D-DIC). In this paper, a novel solution is presented to improve conventional 2D-DIC by eliminating the effect of out-of-plane motion, including translation and rotation. Firstly, an experimental technique using two projected laser strips is proposed to measure the out-of-plane motion of a planar specimen. A theoretical model is then established to predict the pseudostrains caused by out-of-plane motion based on the pin-hole imaging model. Using the measured out-of-plane displacement, the captured deformed images used in 2D-DIC are amended to eliminate the effect of out-of-plane motion by the theoretical model. Finally, two experiments were conducted to validate the effectiveness of the proposed method. Results indicate that application of the proposed method can effectively eliminate the errors caused by out-of-plane motion.     

Optical analysis of polymer powder materials for Selective Laser Sintering

This study increases the basic understanding of optical material properties of polymer powders used in selective laser sintering (SLS). Therefore, different polymer powder materials were analyzed regarding their optical material properties with an integration spheres measurement setup. By the measurements a direct connection between the absorption behavior of the solid material and the overall optical material characteristics of the same material in powdery form could be shown. The results were used to develop an advanced explanation model for the optical material properties of powders. At present, existing explanation models only consider the occurring of multiple reflections in the gaps between the particles to explain the overall optical material properties of powder materials. Thus, by also considering the absorption behavior of the single particles, the basic understanding of the beam-matter interaction and their effect on the optical material properties of powder materials can be expanded.     

Human-to-metal electrostatic discharge current measurements – Notes on the ESD current waveform

The Electrostatic Discharge (ESD) phenomenon has been described through the IEC 61000-4-2. ESD current parameters' values, have been set in this Standard. The theoretical ESD current waveform defined in this standard, describing the conventional Contact discharge mode, needs to be re-evaluated on the basis of accurate experimental data. Even though the standard deals with commercial ESD generators, its goal is to simulate the natural phenomenon as good as possible. More and accurate data may contribute to the better simulation of the natural phenomenon. New values and better comprehension of the phenomenon demand new measurements based on high end measuring equipment. Such works and publications have been carried out the past years. Yet, the need to systematize and integrate this work remains. Larger and trust-worthy series of measurements need to be carried out and presented clearly.This paper deals with new ESD-current data, taken with broadband equipment. New and more detailed measurements like these, were never before taken at such a large number of individuals. The goal of this work is that the data acquired can serve as a basis for re-evaluating the conventional approach of the scientific community to the ESD event.In this paper, using a broadband measuring system, new parameters' values are measured and relations are presented, following standard statistical procedures. The results, which occur from measurements carried out on tenths of human individuals, are questioning the Standard in many points. A new way of approaching the standardization of the ESD current is proposed, as the excuse of the poor measuring equipment that sets barriers on the measuring accuracy, does not apply any more. The charging voltages of 500 V and 1000 V were also examined since such range of voltages are often met at ESD events and they are considered very harmful.     

Interface and defects engineering for multilayer laser coatings

High-reflective multilayer laser coatings are widely used in advanced optical systems from high power laser facilities to high precision metrology systems. However, the real interface quality and defects will significantly affect absorption/scattering losses and laser induced damage thresholds of multilayer coatings. With the recent advances in the control of coating design and deposition processes, these coating properties can be significantly improved when properly engineered the interface and defects. This paper reviews the recent progress in the physics of laser damage, optical losses and environmental stability involved in multilayer reflective coatings for high power nanosecond near-infrared lasers. We first provide an overview of the layer growth mechanisms, ways to control the microstructures and reduce layer roughness, as well as the nature of defects which are critical to the optical loss and laser induced damage. Then an overview of interface engineering based on the design of coating structure and the regulation of deposition materials reveals their ability to improve the laser induced damage threshold, reduce the backscattering, and realize the desirable properties of environmental stability and exceptional multifunctionality. Moreover, we describe the recent progress in the laser damage and scattering mechanism of nodule defects and give the approaches to suppress the defect-induced damage and scattering of the multilayer laser coatings. Finally, the present challenges and limitations of high-performance multilayer laser coatings are highlighted, along with the comments on likely trends in future.     

Laser control of magneto-polaron in transition metal dichalcogenides triangular quantum well

We study the dynamic of magneto-polaron condensate in monolayer two dimensional (2D) transition metal dichalcogenides (TMDs) materials of 2H types in triangular quantum well potential. Within both the quantum mechanical Schrödinger approach (QMSA) and the improved Wigner-Brillouin theory (IWBT), Landau energies levels (LELs) are derived. We have shown that the magneto-polaron condensation is enhanced in monolayer MoSe₂ compared to MoS₂, WS₂ and WSe₂. We derive various levels by increasing a magnetic field and laser parameter. We show that the quantum confinement lifts the degeneracy of the Landau levels (LLs) resulting in an anticrossing and crossing. The dephasing effect due to the quantum well potential's parameter plays an important role in the magneto-polaron energy corrections, which are also affected by the amplitude of the laser field. The system presents Stückelberg oscillations which is important for practical applications.     

角锥棱镜谐振腔激光模式模拟研究

为了探究角锥棱镜谐振腔激光模式,以角锥-平面镜腔为例,将角锥棱镜等效为衍射光栅,考虑角锥镜棱宽在谐振腔中的衍射效应以及二面角误差引起的附加相位分布对谐振腔激光模式的影响,在光学谐振腔理论的基础上,建立了求解本征模式的理论分析模型.采用快速傅里叶法数值模拟不同腔长、角锥镜棱宽和二面角误差情况下该无源谐振腔激光输出模式分布情况.结果表明,在腔长30 cm、角锥镜棱宽小于75μm、二面角误差在-10′~5′之间时,可实现光斑完整的圆形分布输出模式,且有较好的光束质量;棱宽不小于0.4 mm,二面角误差在-40′~10′之间时,光斑为TEM 03阶横模,光场呈六瓣分布;当角锥镜棱宽为0.4 mm、二面角误差为3′,腔长从30~90 cm范围内增加时,该谐振腔输出的激光模式从TEM 03转换成TEM 10.     

强耦合腔-QED系统中原子的纳秒脉冲激发光谱研究

本文在多原子强耦合腔-QED系统中,利用脉冲宽度为5 ns的强脉冲光在垂直于腔轴方向直接激发原子,脉冲的峰值功率为40 mW,通过光学腔观测激发原子辐射到腔中的光子获得相应的激发光谱。我们发现当光场频率和原子跃迁失谐±80 MHz时原子激发率达到最大,而在共振时原子激发被抑制。我们建立了脉冲光与三能级原子相互作用的模型,通过缀饰态能够解释此现象。     

Quantifying interference in multipartite quantum systems

The characterization of quantum correlations is crucial to the development of new quantum technologies and to understand how dramatically quantum theory departs from classical physics. Here we systematically study single- and multiparticle interference patterns produced by general two- and three-qubit systems. From this we establish on phenomenological grounds a new type of quantum correlation for these systems, which we name quantum interference, deriving some quantifiers that are given explicitly in terms of the density matrix elements of the complete system. By using these quantifiers, we show that, contrary to our expectations, entanglement is not a required property for a composite quantum system to manifest multiparticle interference.